HTC SENSE på en Magic 32a

Blir klart sugen på HTC Sense nu när frugan har en HTC Desire.

Men för att kunna lägga in Sense behöver jag uppgradera Radio och SPL.

Detta har jag inte gjort innan, så jag måste arbeta upp modet lite först.

Men jag hittade en bra guide av cursordroid på XDA.

Sen blir det nog att testa Smoki rommen då det verkar vara den som har flest grejer fungerande.

Upgrade to 6.35.10.18 Radio and 1.76.2007 SPL

Prerequisites:
- HTC Magic / Sapphire 32A
- Engineering SPL
----- 1.33.2005
----- 1.33.2009
----- 1.33.2010
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
- Working ADB/Fastboot Drivers
- Basic knowledge or modding your phone

You will need:
- The 1.76.2007 SPL HBOOT image
http://www.theandroidkitchen.com/fil...-1.76.2007.img
- The 6.35.10.18 Radio Image
http://www.theandroidkitchen.com/fil...6.35.10.18.img
- The Amon_RA Hero Recovery (Latest version is 1.5.2 as of this post)
http://forum.xda-developers.com/showthread.php?t=561124

MD5SUMS - thanks march83!
hboot-1.76.2007.img 841eebbffaead7296a50a39920ec30a2
Radio_HTC_PVT_32A_6.35.10.18.img 246a858689a19975bfdcfa5538401c5f

Notes:
- This Radio and SPL is only for the new Sense UI ROMs (CursorSense32A)
- The Hero recovery is required for the new radio. The Sapphire H (Magic 32A) recovery will reboot after a few seconds.
- To select items using the Hero recovery, you need to use the green Talk/Send key on your device. The trackball select key will not work.

Steps:
- Download the files above onto your computer. Save them in the same folder (C:\AndroidSDK\Tools for example)
- Turn off your phone
- Power it on into recovery (hold Home and press Power)
- Run a full nandroid backup (optional, but recommended)
- Turn off your phone
- Power it on into FASTBOOT mode by holding Back and pressing Power
- Plug in a USB cable. you should see FASTBOOT USB on the screen
- From a command prompt, navigate to the folder where you saved the files above.
- Type in these commands:

Code:

fastboot fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img

fastboot flash hboot hboot-1.76.2007.img

fastboot flash recovery recovery-RA-hero-v1.5.2.img

fastboot erase system -w

fastboot reboot-bootloader

- Your phone will reboot back into FASTBOOT.
- Verify that you now have the 6.35.10.18 Radio and 1.76.2007 SPL.

CONGRATULATIONS! You can now flash the CursorSense32A ROM!

There will be other ROMs soon that use this Radio and SPL. It's just a matter of time.

Upgrade from 6.35.07.29 to a new version

You can upgrade radio version from 6.35.07.29 to 6.35.08.29 or 6.35.10.18 without wiping, reflashing or losing any data.

- Download the radio image
6.35.08.29
6.35.10.18
- Save the radio update.zip file to the root of your SD card.
- Boot into Recovery mode, using Home and Power and apply the update like you would any other update.zip file.

Downgrade (Revert back to) 32A 3.22 Radio and SPL

You will need:
- 1.33.2010 Engineering SPL HBOOT image
http://www.theandroidkitchen.com/fil...-1.33.2010.img
- 3.22.20.17 Radio image
http://www.theandroidkitchen.com/fil...3.22.20.17.img
- Amon_RA Sapphire H Recovery (Latest is 1.5.2 as of this post)
http://forum.xda-developers.com/showthread.php?t=530492

Steps:
- Download all of the files to the same folder (C:\AndroidSDK\tools for example)
- Turn off your phone
- Power it on into FASTBOOT by holding Back and pressing Power
- In a Command Prompt, navigate to the folder you saved the files in
- Type in these commands:

Code:

fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img

fastboot flash hboot hboot-1.33.2010.img

fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img

fastboot erase system -w

fastboot reboot-bootloader

- Your phone will reboot back into FASTBOOT
- Verify that you now have 3.22.20.17 SPL and 1.33.2010 SPL

If you have any issues at all, please report them in this post. If you failed to read this post and expect help from any of the community members, expect to be royally flamed!

Happy modding!

Thanks to:
Amon_RA for the Recovery image and the "Take Me Back" steps
MoDaCo for finding the 1.76.2007 SPL for Hero that also works on Magic!

__________________
This posting is provided "AS IS" with no warranties, and confers no rights.